fbpx

NawTone-G

Technical Data

NawTone-G Acrylic Stain (gloss finish) is a hydrous, specially formulated base containing high-quality polymers. The addition of lightfast pigments enables a wide range of colors to be produced. NawTone-G exhibits these overall characteristics:

UV & Weather Resistant | Lightfast | Penetrating | Aspiratory | Gloss Finish| Low Odor | Mold & Mildew Resistant | Quick Drying

NawTone-G is very versatile. It can be applied to brick, block, mortar, stucco, EIFS, and concrete surfaces. By using different application methods and adjusting the transparency and saturation of the product, a variety of appearances can be achieved. This makes NawTone-G a superior choice for new construction, renovation, restoration, and preservation. NawTone-G is used for matching additions, historic preservation, complete color changes, decorative applications and solving color problems in masonry and concrete.

Environmental & Safety Concerns
NawTone-G is water-based, non-flammable, non-hazardous, and has very low VOC content. Use of this product may help your projects qualify for LEED credits.

Specifications

Viscosity: (72° F) 70°-90° KU

pH: 8.5-9.5

Finish: soft gloss

Nonflammable (ASN/ZS 1530.3-1999)

VOC: < 5 g/L (SCAQMDR 1168)

Water Vapor Transmission (ASTM E96-05): 0.337 g/hr m2

Water Vapor Permeance (ASTM E96-05): 6.6×10-8 g/Pa s m2

UV Resistant–Accelerated Weathering (ASTM G154:2000, ASTM G53-88, D2244-89) 2000 H: excellent

Application Temperature: 25°-110°F (-4°-43°C)*

Tack Free Time: 3/4 -1 1/2 H

Dry Time for Reapplication (if required): 4 H

Curing: allow 21 days

Shelf Life: 6 months in factory sealed container

Product Properties

  • Nonflammable

  • Nontoxic

  • Water-based

  • Vapor-permeable

  • Non-film-forming

  • Water washup

*Applications in temperatures below 40°F and when temperatures drop below 40°F within 8 hours of application must be done by Nawkaw.

Scroll to Top